Week 8

Week 8

Title: Software Simulation

Objective: To simulate the circuit

Progress:

The simulation for the development being tested, so the hardware can be determined based on the simulation. The component listed are arrange according its specification. The Peltier cell is not found in the Proteus 8, so it been replace with relay. The relay will switch when the LM35 detect temperature above 30 degree Celsius. The second relay will act as the Peltier cell which it will switch on when the temperature detect is above 31 degree Celsius.

The first and second relay will turn off when the LM35 detect the temperature below 30 degree celsius. 

Conclusion: 

By the end of this week, I managed to simulate my circuit. This simulation is just to show and prove the coding and the LCD works well. However, this is just simulation. The real coding will be done and interface with the Arduino Uno.